Desoldering System and Solder Rework Station

This is a robust and multipurpose desoldering station and soldering rework station that features hot air, a 70 watt soldering iron, digital readout and a mechanical arm. This desoldering system is equiped with our BlackJack SolderWerks TRIPLE PROTECTION SYSTEM which includes: System Cool Down, Auto System Sleep and Overheat Protect.

The system cool down feature removes any residual heat from the heat gun after the hot air is switched off. This allows the heat gun nozzle to rapidly cool down and helps preserve the heating element. The Auto System sleep function converts the hot air gun into a "sleep" mode when the gun has been left unattended & in its cradle and the Overheat Protect system shuts the power down when an overheat  condition is detected in the hot air handle. This is accomplished with a latching fuse that un-latches if the handle overheats and then automaticly re-latches after the system cools down.

Additionally, the BK5050 desoldering and rework station incorporates an led display that displays the temperature of the hot air gun as well as the air pressure. This desoldering system also includes a very handy mechanical arm which will hold the hot air gun in place allowing the user to have two free hands available to manipulate the printed circuit board or to use the soldering iron. The mechanical arm is easy to install. This desoldering station will function with or without the mechanical arm installed.

The BK5050 is a versatile desoldering rework station at an affordable cost. a wide variety of nozzle heads are available and can be viewed at the bottom of this page. BlackJack SolderWerks is a Circuit Specialists brand. Like all other products in this series, the fabrication is above normal standards using extruded  aluminum panelling to build the chassis which presents a unique product with a nice high tech look.

Fully Adjustable Desoldering with Digital Display

SPECIFICATIONS FOR DESOLDERING & REWORK STATION:

• Station Dimensions: 188mm(w) x 126mm(h) x 250mm(d)
• Hot Air Gun
  • Power: 500 Watts  peak
  • Temp range: 100^oC~480^oC
  • Heater element: Metal Heating Core
  • Pump Type & Capacity: Diaphragm Pump, 23Liers per minute maximum
• Soldering Iron
  • Temperature range:200^oC to 480^oC
  • Heater Element : Cermamic Heater/ 75W
  • Iron Voltage: 24 Volts

Users Manual

BK5050 Mechanical Arm