Instek 15MHz Function Generator w/Ext. Counter, Sweep, AM/FM

• Frequency Range 0.01Hz~15MHz
• Max. Frequency Resolution 10mHz
• Dual Display Indicate Frequency and Amplitude
• Built-in 6-digit Counter with INT/EXT Function up to 150MHz High Resolution
• Output Waveforms: Sine, Square, Triangle, Ramp, Pulse, AM, FM, Sweep, Trigger and Gate / Burst
• VCF for 100:1 EXT Frequency Control INT/EXT, AM/FM Modulation
• GCV Output for Synchronization
• Variable DC Offset Control
• SYNC Output
• LIN/LOG Sweep Mode
• Output Overload Protection
• RS-232C Interface Standard

• Output Waveforms: Sine, Square, Triangle, ±Ramp, Pulse, AM, FM, Sweep, Trigger, Gate, Burst
• Frequency Range: 10mHz~15MHz in 8 Frequency Range (auto switch)
• Frequency Resolution: 15MHz~150kHz(100Hz),1.5MHz~15kHz(10Hz), 150kHz~1.5kHz(1Hz),15kHz~150Hz(0.1Hz),1.5kHz~15Hz(10mHz), 150Hz~1.5Hz(10mHz),15Hz~0.15Hz(10mHz), 1.5Hz~0.01Hz(10mH)
• Frequency Accuracy: 0.02% + 5 count
• Output Impedance: 50Ohm ±10%
• Amplitude Range: 10.00V~0.01V(into 50Ohm ) 4 amplitude, |Vac peak|+|Vdc|=5V Resolution: 10mV (10.00V~0.01V)
• Amplitude Accuracy: <=3%± 5 count at 10Hz~1MHz ; <=10%±5count at 1MHz~15MHz
• Amplitude Unit: Vpp, Vrms, dBm
• DC Offset: -5V~+5V(into 50Ohm ) , Resolution 10mV
• DC Offset Accuracy: <=3%± 3 count at amplitude min.
• Duty Control: 80%:20%:80% to 1MHz , Resolution 1%
• Duty Accuracy: <=1% ~ 1MHz at 50% duty
• Display: Dual Display for Frequency 6 digits and Amplitude 4 digits
• Sine Wave Distortion: <= 0.5%(-46dB) THD from 10Hz to 100kHz ,<=-30dBc to 15MHz (spec. applied form 1Vpp~10Vpp)
• Triangle Wave Linear Error: <1% of full scale output at 100Hz
• Square Wave Asymmetry: ±1% of period + 3ns
• Square Wave Rise or Fall Time: < 18nS
• SYNC Output Impedance: 50Ohm±10%
• SYNC Output Level: > 1Vpp open circuit
• Modulation Types: AM, FM, Sweep, Trigger(int/ext), Gate or Burst (implement by trigger type)
• Waveform: Sine, square, triangle, ramp or Variable Symmetry Pulse
• Rate Frequency Range: 10mHz~10kHz in 3 Frequency Range (auto switch)
• Rate Frequency Accuracy: 5% ±1 count
• Rate Frequency Resolution: 10.0kHz~0.1kHz(100Hz), 99Hz~1Hz(0.1Hz), 0.99Hz~0.01Hz(0.01Hz)
• Symmetry: 90%:10%:90% , Resolution: 1%
• Symmetry Accuracy: ±1 count (<=±1%)
• Output Level: >=1Vp-p into 10KOhm load
• Sine Wave Distortion: <=1% from 10Hz to 10kHz
• AM Depth: 0~100%
• AM Modulation Frequency Rate: 0.01Hz~10kHz(INT) DC~1MHz(EXT)
• AM Carries –3dB Bandwidth: <100Hz to >5MHz
• AM External Sensitivity: <=10Vp-p for 100% modulation
• FM Deviation: 0 ~ ±5%
• FM Modulation Frequency Rate: 0.01Hz~10kHz(INT) DC~50kHz(EXT)
• FM External Sensitivity: <=5Vpp for 15% deviation
• Sweep Range: 15MHz~150kHz , 1.5MHz~15kHz , 150kHz~1.5kHz , 15kHz~150Hz , 1.5kHz~15Hz , 150Hz~1.5Hz , 15Hz~0.15Hz , 1.5Hz~0.01Hz
• Width: >100:1 (in same frequency range)
• Rate: 0.01Hz~10kHz
• Symmetry Control: 90%:10%:90% , Resolution: 1%
• Mode: Linear / Log sweep
• Sweep output: 0 to >=-5Vp-p into 10KOhm
• Trigger Start/Stop Phase Range: 80°~90°
• Trigger Rate: 0.1Hz~10kHz
• Trigger Frequency Range: 0.1Hz~1MHz(Useful to 10MHz)
• Ext TRIG Frequency Range DC to 1MHz,TTL compatible input level
• Gate or Burst: Implement by trigger setting
• VCF Range: 100:1(0 to 10V±1)
• VCF Input Linearity: <0.5% to 1MHz,<5% to 10MHz
• VCF Input Impedance: 10kOhm
• GCV Output: To set the voltage between 0.2V to 2V as per different Frequency
• Frequency Counter INT/EXT: Switch Selector
• Frequency Counter Range: 5Hz~150MHz EXT
• Frequency Counter Accuracy: Time base accuracy ±1count
• Frequency Counter Time Base: ±20ppm after 30 minutes warm up
• Frequency Counter Resolution: The maximum resolution is 100nHz for 1Hz and 0.1Hz for 100MHz
• Frequency Counter Input Impedance: 1MOhm // 150pF
• Frequency Counter Sensitivity: <=35Vrms(5~100MHz),<=45Vrms(100MHz~150MHz)
• Memory Save/Recall: 10 Sets of front panel setting memories
• Interface: RS-232C
• Power Source: AC 115V/230V±15%, 50/60Hz

Data Sheet

User Manual