Instek 5MHz Function Generator w/Ext. Counter, Sweep, AM/FM

Features:

• Frequency Range: 0.5Hz ~ 5MHz
• WaveformsFSine, Triangle, Square, Ramp, TTL and CMOS Output
• External Voltage Controlled Frequency (VCF) Function
• Duty Cycle Controlled with Signal Inversion Capability
• Variable DC Offset Control
• Two-Step (-20dB x 2) and Variable Attenuator
• Built-in 6 Digit Counter with INT./EXT. Function up to 150MHz / high resolution
• INT./EXT. AM/FM Modulation
• LIN/LOG Sweep Mode
• GCV Output for synchronization

Specifications:

• Frequency Range: 0.5Hz to 5 MHz (7 ranges)
• Amplitude: >10Vp-p (into 50Ù load)
• Impedance: 50Ohm ±10%
• Attenuator: -20dB±1dB x 2
• DC Offset: <-5V ~ >5V (into 50Ohm load)
• Duty Control: 80% : 20% : 80% to 1MHz Continue variable
• Display: 6 digits LED display
• Sine Wave Distortion: <=1%, 0.5Hz ~ 100kHz
• Sinewave Flatness: <=0.3dB, below 500kHz? <=1dB, below 5MHz
• Triangle Wave Linear: >=98%, 0.5Hz ~ 100kHz? >=95%, 100kHz ~ 5MHz
• Square Wave Symmetry: ±2%, 1Hz ~ 100kHz
• Square Wave Rise or Fall Time: <= 50nS at maximum output (into 50Ohm load)
• CMOS Output Level: 4Vpp±1Vpp ~ 14.5Vpp±0.5Vpp adjustable
• CMOS Output Rise or Fall Time: <=120nS
• TTL Output Level: >=3Vpp
• TTL Output Fan Out: 20 TTL load
• TTL Output Rise/Fall Time: <=25nS
• VCF Input Voltage: 0V~10V ±1V(100 : 1)
• VCF Input Impedance: 10kOhm ±10%
• GCV Output Voltage: To set the voltage between 0V ~ 2V as per different frequency
• Sweep/Manual: Switch selector
• Sweep/Rate: 100 : 1 ratio max. and adjustable
• Sweep/Time: 0.5sec. ~ 30sec. adjustable
• Sweep/Mode: Lin./Log. switch selector
• AM Depth: 0 ~ 100%
• AM MOD. Frequency: 400Hz (INT), DC ~ 1MHz(EXT)
• AM Carrier BW: 100Hz ~ 5MHz (-3dB)
• AM EXT Sensitivity: <=10Vpp for 100% modulation
• FM Deviation 0 ~ + 5%
• FM MOD. Frequency: 400Hz(INT), DC ~ 20kHz(EXT.)
• FM EXT. Sensitivity: <=10Vpp for 10% modulation
• Frequency Counter: INT./EXT. Switch selector
• Frequency Counter Range: 0.5Hz ~ 5MHz (5Hz ~ 150MHz EXT.)
• Frequency Counter Accuracy: Timebase accuracy ±1 Count
• Frequency Counter Timebase: ±20ppm (23°C±5°C) after 30 minutes warm up
• Frequency Counter Resolution: The maximum resolution is 100nHz for 1Hz and 1Hz for 100MHz
• Frequency Counter Input Impedance: 1MOhm//150pF
• Frequency Sensitivity: <=35mVrms (5Hz ~ 100MHz)? <= 45mVrms (100MHz ~ 150MHz)
• Power Source: AC 115V/230V±15%, 50/60Hz

Data Sheet

User Manual