IR Remotely Controlled Dimmer Kit

Together with the 15 channel transmitter (K6710) this receiver allows you to remotely dim lights. With a single channel transmitter you can remotely control up to 15 dimmers (15 x K6712). The dimmer has two memories to preserve distinct dim presettings and in addition you can make a given dimmer insensitive to a certain memory, which can be handy when you use several dimmers in the same room. To complete the whole, the dimmer is equipped with an adapted front plate, allowing easy building-in. The dimmer can also be operated locally by means of a push button. If required you can also set the receiver so as to make it only adopt the on or off state, in order to make it suitable for switching inductive loads such as halogen (with transformer) or neon lamps.

Specifications

• Suppressed triac output: 2A or 440W at 220V
• Can be set for:
  Switchover output (on/off)
  Pulse output (on as long as you press)
  Dimmer output (to be used only with bulbs)
• Four identification codes
• Fifteen channel codes
• Two memories for preserving two dim states or on/off
• Push button for local operation
• Power supply 220 VAC or 110 VAC (*)

Hints

If the supply voltage is 110V, you must fit a 1uF (min 200V) capacitor for C13.

Kit Manual